Gori & Durafloor
PRODUCT LIST
PRODUCTS
DURAFLOR – MASTER
DESCRIPTION
1k product is ready to use, but should be stirred gently before being applied.
Ensure the Matt product is very well mixed before application.
Technical Data:
GORI 51 HIGH TRAFFIC
Floor Finish
Hardwearing, abrasion resistant and fast drying for use on parquet floors, cork and any other interior wood. Apply 3 coats in 1 day. Non-ambering. Easy to use. Excellent flow properties. Resistant to common detergents.
PRODUCT DESCRIPTION
Where to use Interior on parquet floors, cork floors and woodwork. For floors exposed to heavy wear – e.g., halls, stairs, living rooms etc.
Form supplied Ready to use.
Substrate The surface must be clean, dry and solid.
Pre-treatment Waxed floors must be planed down. Previously lacquered surfaces must be sanded to mat surface and cleaned. Residues from soap and lime must be removed.
The surface must be free from oil, grease, dirt, and dust before treatment.
Treatment Read label and instruction before use.
Previously treated surfaces: 1-2 coats GORI 51. We recommend making a small test on old, varnished floors before applying GORI 51 on the whole area. During application and drying, the temperature should be above 5⁰C and the relative humidity below 80%.
On used floating floors: Wood 1 mm thick: do not sand – wood 4 mm thick: sand 1-2 times – wood 6-10 mm thick: sand 2-3 times. New floors: Sand, brush and dust.
Old floors: Sand with a floor sanding machine to remove scratches and old layers of varnish.
Waxed floors: Do not apply GORI 51 but continue using wax.
We recommend making a small test area, before applying on a previously treated surface.
The first week after treatment, you must pay attention to the new, varnished
Technical Data: